Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in High Point?
Spring replacement in High Point typically costs $180 – $340 per spring, including the spring and the labor to install it. Most two-car doors carry a matched pair, and since both springs are almost always replaced together, a pair runs about twice that: roughly $360 – $680. The written estimate we hand you sets the final price, so you know the number before any work starts.
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. If you’re in High Point and your door won’t lift, call (833) 842-1974 and we’ll get an experienced technician out to look at it. Garage doors are all we do, which is why we can usually tell you what’s wrong before we arrive and have you back in operation today.
Key Takeaways
- A single torsion spring replacement in High Point runs $180 – $340.
- A matched pair, which is what most two-car doors need, is about $360 – $680.
- Broken springs are the most common reason a door won’t open, and the repair is usually done the same day.
- Our technicians have up to experience with the springs on Clopay, Amarr, Wayne Dalton, and Raynor doors.
- The estimate is free, and the written price is what you pay.
Spring Replacement Cost Breakdown (2026)
Here’s what the line items on a spring job typically run in the High Point market. Every range below is an estimate; the written estimate sets the final price.
| Job Component | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of torsion springs (about double one spring) | $360 – $680 |
| Extension spring replacement (per spring) | $180 – $340 |
| Cable repair or replacement (often done with springs) | $130 – $250 |
| Roller replacement (a common add-on for noisy older doors) | $110 – $220 |
| Track realignment (if the door jumped the track) | $120 – $240 |
| Panel replacement (if a spring failure let the door drop and bend a panel) | $250 – $500 |
| General garage door repair, all-in, when several parts are involved | $150 – $600 |
The single biggest factor in cost is how many springs you have. A one-car door often has a single spring, so you’re looking at the bottom of the range. A two-car door almost always has a matched pair, which lands near the top. If the spring broke and the door came down hard, it can bend a panel or pop a cable, and that’s where you start stacking a panel replacement or a cable repair on top of the spring job. A thorough inspection tells us which of these apply before we quote.
What Affects Spring Replacement Pricing in High Point
- One spring or two. A matched pair, standard on most two-car doors, doubles the parts and labor. We always recommend replacing both at once even if only one has snapped, because the second is the same age and under the same load.
- Spring type and size. Torsion springs mount on a bar above the door; extension springs stretch along the sides. Different doors use different gauges and lengths, and heavier insulated doors from Clopay or Amarr call for a beefier spring than a basic uninsulated panel door.
- The age of the door and hardware. On a door that’s been in place a long time, the springs aren’t the only worn part. Rollers, cables, and drums may be at the end of their life, and addressing them during the same visit is cheaper than a second call.
- Whether the door is centered or offset. Doors with offset torsion setups take a little more time to service than a standard-centered door, and that shows up in the labor portion of the estimate.
- Condition after the failure. When a spring lets go, the door can slam down, and depending on what it hits, you may be looking at a bent panel or a jumped track in addition to the spring.
- The brand and its hardware. Springs on a Wayne Dalton, Raynor, or Craftsman door come in particular configurations, and a technician who knows the make doesn’t waste time guessing. We work on all of them: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Why Springs Fail in the High Point Climate
A torsion or extension spring is under constant tension every hour of the day, and the metal fatigues with every cycle of the door. The Piedmont’s hot, humid summers and damp winters push a spring through those cycles a little differently than a dry climate would, but the real driver is simply how often the door goes up and down. A door in a busy household with kids and a dog can rack up thousands of cycles a year, and springs are rated in cycles. When one breaks, the door usually won’t lift, and it’s the snap you hear from the kitchen that tells you something let go.
Most springs don’t fail without warning. If your door starts sounding louder, opens unevenly, or you notice a gap in the coil, that’s the window to get it looked at before it breaks at a bad time. A quick inspection now is cheaper than an emergency call later, and it keeps the rest of the hardware from taking the hit.
Why Springs Are a Job for a Trained Technician
Torsion springs hold enormous stored energy. Even with the door down, the spring is wound tight, and the cables and drums are under load. This is the one part of a garage door that genuinely injures homeowners who try to work on it themselves, and it’s why we don’t walk anyone through winding or unwinding a spring over the phone. A technician comes with the right winding bars, the right replacement spring, and the experience to do it safely. Our technicians have up to experience, and they know the difference between a spring that’s worn and one that’s near failure.
If your spring has already snapped, don’t run the opener. It will strain against a door it can’t lift and can burn the motor out, turning a spring job into a spring job plus an opener repair. Leave the door down and call us.
How to Save on Spring Replacement
There’s no coupon needed to keep a spring job affordable. A few practical moves keep the number down:
- Replace both springs at once. A matched pair costs about double a single spring, but doing them one at a time means paying the labor twice. Replacing both while we’re there is the cheaper path over the life of the door.
- Fix the small stuff during the same visit. If the rollers are worn or a cable is frayed, handling it while the door is open and the technician is already on site avoids a second trip.
- Don’t ignore the warning signs. A noisy door or a slight unevenness caught early is a repair. Caught late, it’s a repair plus a panel or track fix.
- Get the free estimate in writing. We give you a straight diagnosis and a straight price before we start, so there are no surprises. Call (833) 842-1974 to book one.
- Keep the opener out of it. If the spring breaks, stop using the door. Running the motor against a broken spring can cost you an opener repair on top of the spring job.
If you’re comparing this repair against a whole new door, the numbers are worth knowing. A new installation typically runs $700 – $2200, so a spring replacement is the clear choice whenever the door itself is still in good shape. Our Arrow Garage Door Service team handles the whole spectrum, from a single spring to full door replacement, so we’ll tell you honestly which side of that line you’re on.
What Happens When You Call
When you call, we take your door’s make and model and what it’s doing, then set a time to come out. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside those dispatch hours is booked into the next opening. When the technician arrives, they check the springs, cables, rollers, and tracks, then give you a written estimate before any work begins. In most cases the spring is replaced on that first visit, and your door is back in operation the same day.
We work on your brand, whatever it is. Whether your door came from Clopay, Amarr, Wayne Dalton, or Raynor, and whether the opener is a LiftMaster, Chamberlain, Genie, or Craftsman, the hardware is familiar. No guessing, no “we’ll have to look that one up.” Straight diagnosis, straight price, fixed door.
If you’re elsewhere in the region, our High Point page covers the area, and we’re glad to talk through what your door needs wherever you are.
FAQs – Spring Replacement Cost
How much does spring replacement cost in High Point?
Spring replacement in High Point typically runs $180 – $340 for a single spring. Most two-car doors need a matched pair, which costs about twice that, around $360 – $680. The written estimate sets the final price, and the estimate itself is free. Call (833) 842-1974 for an exact quote.
Is it cheaper to repair the spring or replace the whole door?
Repairing the spring is almost always cheaper. A spring replacement is $180 – $340 per spring, while a full new door installation typically runs $700 – $2200. If the door panels, tracks, and frame are sound, replacing the spring is the right call. If the door is rusted through or badly bent, replacement may be the better long-term move. Call (833) 842-1974 and we’ll give you a straight answer either way.
Can you replace a broken spring the same day?
Yes, in most cases. A broken spring is the most common call we get, and with fast dispatch from 7am to 7pm, Sunday through Friday, we can often get a technician out the same day. We answer 24/7, so a call outside those hours is booked into the next opening. Call (833) 842-1974 to get on the schedule.
Do I need to replace both springs if only one broke?
We recommend it. A matched pair of springs is installed together and wears at the same rate, so when one snaps, the other is close behind. Replacing both during one visit costs about twice a single spring ($360 – $680 for the pair) and saves you the labor of a second trip. Call (833) 842-1974 to talk through your door.
What does a spring replacement estimate include?
The estimate covers the replacement spring, the labor to wind and install it safely, and a check of the cables, rollers, and tracks that work alongside it. If those show wear, the estimate will spell out the add-on cost, such as roller replacement at $110 – $220 or cable repair at $130 – $250. The written estimate sets the final price. Call (833) 842-1974 for a free one.
Get a Straight Price on Your Spring Replacement
A broken spring doesn’t have to ruin your day. In High Point, a single spring replacement typically runs $180 – $340, and a matched pair about $360 – $680, with the written estimate setting the final price. We give you a clear diagnosis and a clear number before any work starts, and we only work on garage doors, which means we know your brand and your hardware. Call (833) 842-1974. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the estimate is free.
Pricing reflects the High Point market as of 2026. Arrow Garage Door Service offers free estimates – call (833) 842-1974.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Jodi Norris"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Reggie Dawson"Showed up when they said they would. That's most of the battle."
- Justin Kim